 |
|
|
|
|
|
|
5"
130mm |
3/4 oz
21 grams
 |
Casting |
|
Jigging
|
|
6" to 4ft
|
| 8 to 20 lb |
|
|
|
|
|
|
| Pro Staff Tips: |
|
Unique dual blade swinging arm design and "bendable wire arms make this the ultimate spinnerbait in terms of versatility and fishability. |
|
|
About Pro-Shad Spinnerbait Finesse:
|
| |
Pro-Shad Spinnerbait Finesse: The Pro-Shad Spinnerbait Finesse body and blades are made to look alike. Thanks to their similar shape and finishes, the body and blades truly appear as a small school of baitfish. The larger front blade is mounted on the wire with a custom-designed, specific clevis of a big diameter to give the blade more eccentricity from the axle of rotation for more reactivity and to move a lot of water without pulling hard on the rod. The smaller back blade is mounted with a ball bearing swivel for 360 degrees of independent freedom from the arm. Both blades turn as soon as they hit the water. Use breaks in the retrieve, let it free fall, and both blades still turn. There's never down time when one blade's not working. Its stable balance also permits the angler to burn it fast. Both blades constantly create lots of turbulence and extremely realistic baitfish flashes and silhouettes at any speed from ultra slow to super fast.
The Finesse model has infinite grace and agility to convince lure-smart fish to bite. It will fool even the most wary, educated fishes with its small fish-shaped blades and realistic body finishes. Yet it has the guts for hard core power fishing tactics too!
The Finesse model features a rubber retainer around the line tie eye to help prevent your line from being pulled out of place.
|
|
|
 |
Colour Options |
More on Pro-Shad Spinnerbaits...
The body is made of bismuth encased within hard plastic. That permits the body to have the most realistic finishes with lifelike details such as scales, eyes and gill flaps that rival any crankbait.
Uniquely designed with a wide-gap for an increased hookset ratio and better holding power, the high-quality black nickel hook has a super hard sharpened point. The design of this special wide gap is to really increase the distance behind the upper lip where the hook sets when a fish bites. Especially when a large fish swallows the whole thing, this wide gap is what you want (compared to traditional round bend spinnerbait hooks). SEBILE's offset wide gap hook is superior first for the hookset further behind the lip, and second to hold better during a fish's head-shaking fight.
The Pro-Shad Spinnerbait's perfect balance, custom blades and jointed arm make it easy to reel. The high tensile steel wire selected permits the angler to fine tune lure action.
"The wire that comes out from the nose, I choose to make it using a specific steel that you may bend to adjust the wire to different angles for different conditions. For example, if you want to fish shallow in grass or brush, then bend the longest piece of the wire up and also open the angle between it and the smaller piece of wire. Doing that, you raise the level where the lure is tied to the line - the pull point - and that means the whole lure will have a lower center of gravity giving it first, more stability to fish even shallower and second, it increases the deflection that the main wire gives in front of the lure, pushing it off of and away from grass or brush better," says Patrick Sebile.
"Now if you wish to fish more open water and make longer distance casts, what I recommend is to lower the position of the wire to reduce the angle between the longest and the shortest piece of wire. This on-the-water adjustability is something that is made possible by the choice of the steel wire but also because we have the junctured arm where the blades spin. If you had a fully fixed blade wire (like a standard spinnerbait) and you were able to adjust that for different conditions, it's no guarantee the blades will be able to work under any given angle but in the Pro-Shad Spinnerbait's case, yes it will work absolutely all the time," says Patrick.
|
|
|
|
|
|
